Course length: 8 nights

Learning Objectives:

  • Parts of a PLC, Fixed vs. Modular, PLC scan, Remote Racks, Fixed Addressing, Rack/Slot Addressing, I/O Image Tables, Discreet and Analog I/O, Memory
  • XIC, XIO, OTE instructions, sinking/sourcing modules, PLC Scan, Output Module Types, Special I/O Modules, memory, HMI, Number Systems (decimal, binary), Number Conversions (octal, hex, BCD), Binary Addition, Logic Gates
  • OTL, OUT instruction review, OTL step logic programming, Timer Addressing, Timer Bit-Level and Word-Level Addressing, Logic for Self-Resetting Timer, Counter Addressing, minute timer, hour/24 hour counter program, Cascaded Timers,
  • Data Transfer Instructions, MOV, MVM, Timer and Counter Words 0 to 3, Addressing timer/counter PRE and ACC values, COP, FLL Instructions, Data Compare Instructions (EQU, NEQ, GRT, GEQ, LEQ, LIM, MEQ, LES) Data
  • Troubling shooting and serving the PLC system and PLC Network in Manufacturing
  • Traffic Light Lab programming using latch/unlatch logic
  • PROM, EPROM, EEPROM, RAM, SRAM, DRAM, ALU, opto-isolation, Analog/digital converters, PAC versus PLC, SCADA

Included with the course:

click ac power

CLICK AC power supply, 100-240 VAC nominal input, 24 VDC nominal output, 0.5A continuous.

22mm pushbutton enclosure

22mm pushbutton enclosure, 4 hole(s), 185 x 70 x 51mm (HxWxD), wall mount, thermoplastic ABS, gray, screw cover.

Pushbutton Red

Pushbutton, 22mm, momentary, (1) N.C. contact(s), plastic base, plastic bezel, Operator: red, flush, 30mm, round, plastic.

pushbutton black

Pushbutton, 22mm, momentary, (1) N.O. contact(s), plastic base, plastic bezel, Operator: black, flush, 30mm, round, plastic.

Indicating light green

Indicating light, IP65, 22mm, LED illuminated, green, round, plastic base, 24 VAC/VDC, full voltage

indicating light red

Indicating light, IP65, 22mm, LED illuminated, red, round, plastic base, 24 VAC/VDC, full voltage.

indicating light yellow

Indicating light, IP65, 22mm, LED illuminated, yellow, round, plastic base, 24 VAC/VDC, full voltage.

3 hole

22mm pushbutton enclosure, 3 hole(s), 140 x 70 x 51mm (HxWxD), wall mount, thermoplastic ABS, gray, screw cover.

*if you did not takeĀ Programmable Logic Controllers PLC Foundation you will need the hardware from that class.